Baspaket – GZ SQLoud 2×12 + AI-Sonic mono

GZ SQLoud 2×12 inc includes 2pcs of GZUW 12SQ-D2 -subwoofers, 4-AI212SLOT -enclosure and Ai-Sonic S2-A2200.1 -amplifier with wired remote control.

GZUW 12SQ-D2:

These subwoofers are not made to make SPL records. These are made to give a natural and accurate sound with all the low notes. Listening pleasure with all kinds of music. You can use almost any type of enclosure, but for the very best results small sealed is the way to go. Sensitivity is good so you can invest your amp money to quality instead of thousands of watts. Excellent choice to car specific enclosures.

4-AI212SLOT:

The remodel of 4-AI212SLOT is an BIG subwoofer enclosure, made of MDF board.
The large port with rounding.
Enclosure is upholstered at black carpet and the front panel has carbon fiber look tape. Enclosure has cable terminals also.
Dimensions: width 930mm x height 380mm x depth 400mm

S2-A2200.1:

AI-Sonic S2-A2200.1 is mono D class amplifier for users, who want to feel pure sound quality.
Amplifier gives more power as there are mentioned at the specs.

Finished dark cover, which profile is brushed black aluminium
When amplifier is on. There is indicator light in AI-Sonic logo!

Includes a remote control, which has three different indicator-leds.
(protection, power and clipping)
(Works only when LPF is turned on.)

GZUW 12SQ-D2:

30 cm / 12″ SQ Subwoofer
600 WRMS
Rec. amplifier power 4-800 Watts ( rms )
2 x 2 ohm
50 mm / 2″ copper voice coil
Reinforced paper cone
Audiophile POLYCOT spider

4-AI212SLOT:

Ported enclosure for 2×12″ subwoofer
Net volume: 2×40 liters.
Port area: 350 cm2
Port height: 350mm
Port width: 100mm
Tuning frequency: 38 Hz
Diameter of speaker hole: 285mm
Measurements ( W x H x D ): 930 x 380 x 400.

S2-A2200.1 with S2-BASS KNOB:

RMS POWER (1ohm) THD 0.5% 2200W
RMS POWER (2ohm) THD 0.5% 1400W
RMS POWER (4ohm) THD 0.5% 750W
BRIDGED POWER(2ohm) THD 0.5% 4400 W ( Link )
BRIDGED POWER(4ohm) THD 0.5% 2800W ( Link )
T.H.D: 0.5%
BANDWIDTH: 10-200 Hz
S/N RATIO(A-WEIGHTED): 90dB
INPUT SENSITIVITY: 0.35- 6V
LOW PASS: 50-200 Hz
SUBSONIC: 10-50Hz
CROSSOVER SLOPE: 12dB /24dB/oct
BASS BOOST: 0-12dB(@45 Hz)
POWER FUSE: External 250A

Cable fitting size:
+12V = 50mm2
GND = 50mm2
REM = 6mm2
SPEAKER = 20mm2

Current Draw (Max): 250A

DIMENSIONS: W: 183mm / (7.2 IN)
H: 60mm / (2.4 IN)
L: 524mm / ( 20.6 IN).